1H-Pyrrole-2-carbonyl chloride, 1-methyl-
1-Methylpyrrole-2-carbonyl chloride
CAS: 26214-68-6
Molecular Formula: C6H6ClNO
1H-Pyrrole-2-carbonyl chloride, 1-methyl- - Names and Identifiers
| Name | 1-Methylpyrrole-2-carbonyl chloride |
| Synonyms | 1-METHYLPYRROLE-2-CARBONYL CHLORIDE 1-Methylpyrrole-2-carbonyl chloride 2-(Chlorocarbonyl)-1-methyl-1H-pyrrole 1-Methyl-1H-pyrrole-2-carbonyl chloride 1-METHYL-1H-PYRROLE-2-CARBONYL CHLORIDE 1H-Pyrrole-2-carbonyl chloride, 1-methyl- |
| CAS | 26214-68-6 |
| InChI | InChI=1/C6H6ClNO/c1-8-4-2-3-5(8)6(7)9/h2-4H,1H3 |
1H-Pyrrole-2-carbonyl chloride, 1-methyl- - Physico-chemical Properties
| Molecular Formula | C6H6ClNO |
| Molar Mass | 143.57 |
| Density | 1.22±0.1 g/cm3(Predicted) |
| Boling Point | 78 °C |
| Flash Point | 72-74°C/10mm |
| Water Solubility | Reacts with water. |
| Vapor Presure | 0.231mmHg at 25°C |
| BRN | 472022 |
| pKa | -8.74±0.70(Predicted) |
| Sensitive | Moisture Sensitive |
| Refractive Index | 1.5700 |
1H-Pyrrole-2-carbonyl chloride, 1-methyl- - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R34 - Causes burns R29 - Contact with water liberates toxic gas R14 - Reacts violently with water |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S8 - Keep container dry. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S30 - Never add water to this product. S23 - Do not breathe vapour. |
| UN IDs | 3265 |
| Hazard Class | 8 |
| Packing Group | II |
1H-Pyrrole-2-carbonyl chloride, 1-methyl- - Introduction
It is an organic compound whose structural formula is C6H6ClNO. The following is a description of its nature, use, formulation and safety information:
Nature:
chloride is a colorless to yellowish liquid that has a pungent odor at room temperature. It is highly corrosive and can react violently with water, acids and alkalis. It is susceptible to moisture and decomposition in the air.
Use: chloride is widely used as a substituent in organic synthesis or as an intermediate for the construction of other organic molecular skeletons. It can be used to synthesize a variety of organic compounds, such as drugs, dyes and pesticides. In addition, it can also be used as a reagent for chemical research.
Method:
The preparation method of chloride is mainly realized by the following steps:
1. First dissolve 1-methyl pyrrole in anhydrous dichloromethane;
2. Add excess homogenate anhydrous hydrochloric acid to continue the reaction;
3. The reaction mixture was cooled and then filtered;
4. Distillate the filtered solution to collect the prepared chlorine.
Safety Information:
. chloride is irritating and corrosive, and may cause burns or injuries in contact with skin and eyes. Appropriate protective equipment such as safety glasses, gloves and laboratory coats should be worn during handling. Operate in a well-ventilated area to prevent gas accumulation. Avoid contact with acids, alkalis and oxidants. If exposed or inhaled, seek medical help immediately.
Nature:
chloride is a colorless to yellowish liquid that has a pungent odor at room temperature. It is highly corrosive and can react violently with water, acids and alkalis. It is susceptible to moisture and decomposition in the air.
Use: chloride is widely used as a substituent in organic synthesis or as an intermediate for the construction of other organic molecular skeletons. It can be used to synthesize a variety of organic compounds, such as drugs, dyes and pesticides. In addition, it can also be used as a reagent for chemical research.
Method:
The preparation method of chloride is mainly realized by the following steps:
1. First dissolve 1-methyl pyrrole in anhydrous dichloromethane;
2. Add excess homogenate anhydrous hydrochloric acid to continue the reaction;
3. The reaction mixture was cooled and then filtered;
4. Distillate the filtered solution to collect the prepared chlorine.
Safety Information:
. chloride is irritating and corrosive, and may cause burns or injuries in contact with skin and eyes. Appropriate protective equipment such as safety glasses, gloves and laboratory coats should be worn during handling. Operate in a well-ventilated area to prevent gas accumulation. Avoid contact with acids, alkalis and oxidants. If exposed or inhaled, seek medical help immediately.
Last Update：2024-04-09 20:52:54
